Introduction: save the release agent: the amount of robot spray and artificial spray release agent is the same. It saves more than half of the dosage of the release agent, and the spray position is more accurate than that of the traditional sprayer. It can improve the quality of the product. The copper tube sprays, because of the air pressure reason, the copper tube will be changed after a few hours, and it needs to be adjusted manually, while the robot fixed the spray. High accuracy and many stored programs: can the robot be right.
Save release agent: The dosage of the robot spray and the artificial spray release agent is the same, which saves more than half of the releasing agent dosage than the traditional sprayer
The spray position is accurate: it can improve the quality of products. The copper tube sprays, because of the air pressure reason, the copper tube will be changed after a few hours, and it needs to be adjusted manually.
Storage program: robot can store more than 99 spray programs for different molds, write programs, and then tune them out for use.
Life expectancy: after 4 years of conventional sprayers, there are many problems, such as slideway and guideway wear, and the robot will live longer than 8 years under proper operation.
Robot flexibility is high: the traditional sprayer can only spray, and when the robot changes the fixture, it can also be used for picking or other purposes.
Program changes are simple: The robot has a hand-held programmer for easy operation.
The fault rate is low: the traditional sprayer will be repaired several times on average, but the robot will hardly fail at the correct operation.
