1.In die-casting production, when die-casting parts are stuck, you can use a spoon to pour the aluminum alloy onto the die-casting parts of the die (generally the weight is about the same as that of the die-casting parts). The die casting is thermally expanded, and the die casting of the sticking template is tried to be ejected by the ejector of the ejection cylinder, and the die casting of the static die is pried out with a chisel.（Bengbu Longhua Die Casting Machine Co.,Ltd.  www.longhuamachine.com/www.diecastingmachinechina.com）

2.If the above method does not work, the only way to remove the mold, with a chisel bit by bit to clean down the sticky mold casting.（Bengbu Longhua Die Casting Machine Co.,Ltd.  www.longhuamachine.com/www.diecastingmachinechina.com）

3.Check whether there is good spraying on the parts where the mold is overheated, such as the long core;（Bengbu Longhua Die Casting Machine Co.,Ltd.  www.longhuamachine.com/www.diecastingmachinechina.com）

4.Check whether the die drawing inclination of the die casting is maximized, and increase the die drawing inclination can reduce the adhesive mold;（Bengbu Longhua Die Casting Machine Co.,Ltd.  www.longhuamachine.com/www.diecastingmachinechina.com）

5.Check whether the mold is rough, or if there are places where the die is drawn backward, repair and polish these places（Bengbu Longhua Die Casting Machine Co.,Ltd.  www.longhuamachine.com/www.diecastingmachinechina.com）

6. If the die casting always sticks to the static template, you can deliberately rough the unimportant parts of the dynamic mold, increase the clamping force of the dynamic mold, so that the die casting will no longer stick to the static mold.（Bengbu Longhua Die Casting Machine Co.,Ltd.  www.longhuamachine.com/www.diecastingmachinechina.com）