2020 CHINA DIECASTING International Die-casting Exhibition & CHINA NONFERROUS Shanghai Non-ferrous Exhibition is about to open!
There have been a lot of questions about the exhibition in recent months.
Is it safe to visit the exhibition this year?
What materials are needed to enter the pavilion?
◆ When can I enter the pavilion?
How do I get to the pavilion?
◆ Are there any simultaneous activities on site?
Now it's time for a solution!
FAQ for exhibition viewing
Q:What are the changes in the process of entering the pavilion this year due to the epidemic?
A:This year, all visitors must meet four requirements at the same time: consistent identification (face recognition), wearing a mask, showing a green code and a body temperature not exceeding 37.3 degrees Celsius.
No one can enter the exhibition hall if any of the conditions do not meet the regulations.
Q:Where do I get the random code?
A:Available with bid, alipay, WeChat or scan the qr code below.
Q:Can I enter the exhibition hall with yellow code?
A:Only the green code is allowed.
Q:What are the requirements for visitors from or through high-risk areas to enter the Pavilion?
A:Novel Coronavirus nucleic acid test report and green travel code must be presented before entering the novel coronavirus within 7 days.
For specific implementation measures, please refer to "Shanghai will continue to strengthen the management of people coming to Shanghai and returning to Shanghai from or through high-risk areas in China".
Q:What is the real-name admission system?
A:All exhibition documents must provide id number application.
The site with the original registered ID card, through the gate brush id card and face recognition after admission.
People from Hong Kong, Macao and Taiwan regions and foreign nationals with permanent residence in China must show their valid credentials and take a photo at the registration counter before they are allowed in.
Q:Do I need to make an online reservation for the exhibition in advance?
A:All visitors are required to register their real names online before the exhibition and choose the time to visit.
In case of peak passenger flow, please follow the instructions of the staff and attend the exhibition in batches.
Q:What other epidemic prevention measures have been taken at the exhibition site this year?
A:1. Carry out regular key disinfection of all high-frequency contact areas.
The exhibition hall or outdoor awning public areas, corridors, passageways, toilets and other places should be disinfected at least once a day, and relevant sanitation disinfection records should be kept.
Dustbins (buckets) shall be cleaned and disinfected at least once a day;
The toilets in the exhibition area shall be ventilated to ensure the normal use of water supply, dryers and other facilities.
Eat in designated dining areas or restaurants, avoid concentrated meals;
2. During the exhibition, alcohol-free hand sanitizer will be provided at the main entrance and exit of each pavilion for disinfection.
At the same time, a mask application point will be set up at the entrance of the exhibition hall. If necessary, please go to apply for masks.
3. Ensure air circulation in the exhibition hall and conference area, and open the main entrance doors of the exhibition hall;
4. All staff, volunteers, on-site service personnel, exhibitors and visitors of this exhibition must register in real name.
All visitors are required to meet the following four conditions: consistent id, wearing a mask, showing the green code and normal body temperature;
5.All exhibitors are required to sign the Letter of Commitment for Epidemic Prevention and Control to ensure effective linkage of epidemic prevention.
Audience entry time:
9:00-17:00, July 15-17, 2020
Location:
Shanghai New International Expo Center (Entrance Hall no. 2, at the entrance of Fangdian Road and Huamu Road)
Summary of contemporaneous activities
Mold Day
● Time: 14:00-17:00, July 15
● Special session for precision mold manufacturing
● Location: N1D12 Nonferrous casting Forum area
Overseas Market Day
● Time: 14:00-17:00, July 15
● Event name: 2020 Sino-foreign Die Casting Technology Forum
● Venue: N2C52 Conference Theme Forum Area
Technology Innovation Day
● Time: 10:00-17:00, July 16
● Event name: die casting industry annual innovation technology conference
● Location: N1D12 Nonferrous casting Forum area
Car Technology Day
● Time: 10:00-17:00, July 16
● Automotive Lightweight Development Forum
● Venue: N2C52 Conference Theme Forum Area
Die casting project
● Time: July 15-17
● Activity name: colored casting integration exhibition and casting selection activity
● Location: N2C14 non-ferrous casting Integration exhibition area
● Time: July 15-17
● Event name: Japanese high quality die casting exhibition
● Location: N1A22 Japan high quality die-casting exhibition area
● Time: 9:30-17:00, July 17
● Activity name: Die casting technical expert clinic
● Location: Cast booth in N2A52
Special session on non-ferrous alloy casting technology
● Time: 10:30-13:00, July 15
● Special session of Magnesium alloy casting Technology
● Location: N1D12 Nonferrous casting Forum area
● Time: 14:00-17:00, July 15
● Special session of low-pressure gravity casting technology
● Venue: N2A34 PSB booth
