125-400T (2# machine) and 500-1000T (4# machine)
Sprayer 1 servo, that is, arm up and down servo
1100-1600T (6# machine) is a 7-servo manipulator
Sprayer 2 servo, that is, arm up and down servo; base traverse servo

The main use is to spray the release agent to make the mold surface cool quickly and improve production efficiency.

Servo sprayer machine (nozzle type) technical characteristics:

1. Mitsubishi controller and Inovance servo motor drive, high efficiency and stability;

2. The time and amount of release agent sprayed on the fixed mold and movable mold sides can be adjusted separately;

3. The rising and falling speed is stable, and there is an advance standby function;

4.With anti-drop device, buffer buffer function;

5.PLC control circuit, touch screen adjustment, fault code display function, easy to check and maintain.

Advantage
1. Good adaptability
The mold surface temperature difference is small and the thermal stress is small. The mold temperature can be between 50 degrees Celsius and 400 degrees Celsius.
2. Small temperature difference
There is no need to blow dry, which shortens the spraying cycle time, improves production efficiency, leaves no moisture residue, reduces the amount of release agent produced by pores, and saves costs.
3. Fine atomization
It can realize small spraying volume and is suitable for pure oil spraying, water-based spraying and graphite emulsion spraying. Each nozzle can independently adjust the flow rate, and the flow rate is not affected by hare pressure.