Request a Quote
Language : English

English

  • Die Casting Machine Accessories: Injection Rod
    Die Casting Machine Accessories: Injection Rod
    1. The injection rod material produced by our company is H13 or 45# steel.
    2. After rough machining of the material, it is tempered and nitrided, and the hardness reaches the drawing requirements.
    3. The coaxiality of both ends of the injection rod produced by our company can reach 0.03-0.05mm.
    4. The injection rods are inspected by thread plug gauges before leaving the factory, so the dimensions must meet the drawing requirements before leaving the factory.
    5. Production cycle: 4-7 working days.

    The material of the injection rod is GB40Cr, heat treatment and straightening T245-265, surface blue treatment, high frequency quenching HR38-42, specification diameter 10-500mm, durable. We can customize the production of injection rods for various brands of die-casting machines.

    Product Description:
    The injection rod is made of high-quality 45# steel, which is tempered after rough machining.
    It has good strength and toughness, good hardenability, and small quenching deformation, and can better ensure coaxiality with the pressure chamber and punch. In addition to injection rods for aluminum die-casting machines of various tonnages, we can also customize the models used by Lijin, Yizumi, Toyo, Toshiba and other die-casting machines.
    1. Product base material
    The main part of the injection rod is made of high-quality 45# steel, and the cooler part is made of stainless steel tubes.
    2. Heat treatment process
    1. After rough machining of the product, the materials are uniformly quenched and tempered.
    2. After finishing the product, the main body is blackened.
    3. Precautions for use
    The service life of the injection rod depends on two aspects, one is the machining accuracy and heat treatment process, and the other is that during use, when employees change the connector and hammer head, the threads are not screwed in place, causing the thread to be pulled and scrapped.
  • 1:400 Release Agent Used for Spraying Molds
    1:400 Release Agent Used for Spraying Molds
    Release agents in the die-casting industry have the characteristics of mold release, degradability, high temperature resistance, no pollution to the metal surface, uniform coating, easy cleaning, stability and adaptability, etc., and are essential to ensure the smooth progress of the die-casting process and stable product quality. Important supporting materials.
  • Special Hose For Die Casting Machine
    Special Hose For Die Casting Machine
    Special hose for die casting machine
  • Coating agent
    Coating Agent Used in Die-casting Production Process
    The covering material or coating used in the die-casting process. In die casting, special coatings or coatings are usually used to protect the surface of the mold, preventing molten metal from adhering or damaging the mold. These coatings can usually improve the wear resistance and extend the service life of the mold.
  • Die Casting Machine Accessories: Die Casting Machine Pin
    Die Casting Machine Accessories: Die Casting Machine Pin
    Our factory specializes in the production of various domestic and foreign brands of die-casting machine pins and nitrided shafts. The pin material is impregnated with 20CrMoTi, and the material is forged and normalized. The carburized layer before grinding is 1.5, quenched HRC56-62, surface nitriding depth 0.5-0.8, HV900-1000, brittleness less than level two, thread nitrogen resistance protection, simple installation and disassembly, wear-resistant and high-temperature resistant, good cooling effect, anti- Impact and corrosion resistant, can be specially produced according to customer drawings, durable, high quality and low price.
    The specific die-casting machine brands are as follows:
    Lijin, Yizumi, Bühler, Xinjiasheng, Aluminum Platform, Toshiba, Toyo, Ube, Yongda, Itela, Fulai, Sanji, Shanghai, Longhua, Baoyang, Haitian, etc.:
    The specific model specifications of the injection chamber of the die-casting machine are as follows:
    125T/140T/160T /180T/ 200T/ 280T/ 400T/ 500T/550T / 630T/700T / 800T /900T/ 1000T/1100T /1250T/ 1300T/1600T /2000T /2600T/3000T/45 00T

A total of 1 pages

leave a message leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

News

Contact