Request a Quote
Language : English

English

160T High Pressure Aluminum Die Casting Machine

Since 2006, we have established a production base of die casting machines with such institutes as Anhui Institute of Science and Technology, Chinese Academy of Sciences, Nanjing University, China University of Science and Technology and Tsinghua University to jointly develop and produce intelligent die casting machines.

Products Description

High Pressure Aluminum Die Casting Machine

Cold Chamber high quality Die Casting Machine




Parameters of cold chamber die casting machine(160T)  

Items

Unit

Specification

Hydraulic Working Pressure

MPa

7

Clamping Force               

KN

1600

Space Between Tie Bars

mm

440*440

Tie Bar Diameter

mm

¢80

Die Opening Stroke

mm

350

Injecction Force(intensify)                  

KN

220

Plunger launch distance

mm

120

Injection position

mm

0  --  140

Plunger Diameter

mm

¢40----¢60

Injection Stroke

mm

320

Casting pressure (intensify)

MPa

143/92/64

Casting Fiange Protrusion

mm

10

Casting Fiange Diameter

mm

110

(40Mpa) Max Casting Area Under 40Mpa

CM2   

390

lnjection Weight(Al)

Kg

1.8

Die Height(Min--Max)

mm

200~550

Ejector Force

KN

100

Ejector Steoke

mm

80

Motor Capacity

Kw

11

Machine Dimensions  (L*W*H)

m

5*1.4*1.6

Referential Machine Weight For Uplifting

T

4.8

Oil Tank Capacity

L

300

WE reserve the right to make any technical improvement without further notice


Main features of the product:

1.  Double proportional control (electric regulation of pressure and flow, with a multi-level pressure and speed control as well as low pressure die close protection functions).

2.  Dual circuit design (air injection and pressure building are separately designed without mutual interference and fault occurrence).

3.  Four-stage (multi-stage) injection system:

     A.Maximum speed> 8M/s (6M / s for those more than 2000T), which can effectively control the filling time and casting formation, in addition to unique braking and uniform acceleration injection function that can effectively prevent flash and allow more flexible injection process.

     B.Minimum speed 0.1-0.7M/s, which can be precisely controlled to prevent air invasion from causing air trap.

     C.Pressure building time ≤15 M/s, which allows to change pressure building speed according to process requirements, strengthening the casting density without causing product distortion.

      D.Dry cycle time is reduced by more than 15%; Oil pump flow increases by more than 20%; Cooler capacity is enhanced by more than 100%; Proportion of conforming finished products rise by 100%; productivity is improved by 20% as compared to the past.

4.  The internationally-favorable PLC man-machine interface control system, casting product data storage and monitoring capabilities, timely alarm in case of abnormality, and elimination of large quantities of defective products.

5.  Unique static and dynamic performance with dual core-pulling devices ensures one-time formation of precise, complicated products.

6.  The injection system uses European draw-bar structure with a variety of choices for center and eccentric injection positions that provide easy adjustment, high precision, and applicability to various complex molds. 

7.  Large-scale die-casting machine above 1600T uses hydraulic pumping means which allows safe and fast replacement of large molds.

8.  Independent quick clamping system and unique hydraulic driven gear-type mold height adjusting mechanism are resistant to impact, providing longer service life and fast production, with an output on a shift increased by over 15%.

9.  Liquid nitrogen super low temperature installation method ensures precision and prolongs service life of toggle parts. 

10.  High quality, high rigidity and wear resistant casting platen adopts finite element analysis design that brings even stress distribution, little distortion and precise mold clamping. 

11.  Electric central lubrication system provides scheduled, quantitative lubrication and improves service life.

12.  Electrical and hydraulic components are well-known brands made in Europe, Japan and China Taiwan.

13.  Die-casting unit island design provides various interfaces and software packages for a variety of advanced intelligent peripheral devices.

14,  Hydraulic system consists of:The most advanced uniform accelerated multistage injection system in ten world

Packaging and delivery of die casting machines:


We have our own factory, containers can be directly from the factory to extract die-casting machine and related machine parts. Our packing is standard packing. The wooden cases we use are for export use only.

Our customers

Please contact me

Send a Message
if you have any problem when using the website or our products, please write down your comments or suggestions, we will answer your questions as soon as possible!Thank you for your attention!
leave a message leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

News

Contact