Request a Quote
Language : English

English

Aluminium Alloy Cold Chamber Die Casting Machine

LH-HC-50T Hot Chamber Die Casting Machine for Small Zinc Parts

LH-HC-50T horizontal hot chamber die-casting machine is specially developed for ultra-miniature zinc alloy precision die-casting parts. The gooseneck injection assembly is directly immersed in the insulated crucible melt, without the need for an independent soup feeding mechanism. The molten metal filling path is short, there are few oxidation inclusions, the blank is fine and tight, and the plating pinholes and blistering defects are greatly reduced. The structure of the whole machine is simple and reliable, with proportional hydraulic pressure and segmented closed-loop temperature control of the crucible, gooseneck, and nozzle. It has good repeatability of injection parameters, fast mold change, and is suitable for multiple varieties and high-frequency production changes. It can be used with simple spray and pick-up manipulators to build lightweight automation units. It is widely used in the mass production of ultra-small parts such as jewelry micro-accessories, mini zipper hardware, glasses micro-parts, stationery hardware, etc. It is suitable for domestic small-order factories and foreign trade jewelry orders.
Application scenarios

  • Jewelry accessories: earring bases, bracelet beads, miniature flowers, small pendant accessories
  • Bag zipper hardware: ultra-fine zipper pullers, micro decorative buckles, small hang tags
  • Craft gifts: mini badges, small nameplates, stationery and decorative hardware
  • 3C micro accessories: earphone decorative small pieces, micro decorative rings, small decorative buckles

  • Product Origin:

    Anhui China
  • Item NO.:

    LH-HC-50T
  • Shipping Port:

    shanghai Port
  • Color:

    Customizable
  • Lead Time:

    1set,20days;≥2sets,To be negotiated
  • Price Range:

    1-2/30000$
Products Description


    Core Selling Point
    ✅Complete tonnage coverage, from small parts with multiple cavities to large parts, there are corresponding models
    30T–450T complete sequence: small tonnage is suitable for multi-cavity small precision parts such as buttons and zipper pullers; medium and large tonnage can be used for large-sized zinc alloy parts such as locks, brackets, car models, etc. When customers expand production, they can be smoothly upgraded within the same brand series, and the processes and accessories are common.
    ✅The hot chamber supplies ingredients in one piece, eliminating the need for soup, fast pace and low loss
    The crucible has a built-in machine, and the molten metal is directly pressed into the mold cavity through the gooseneck. There is no need to scoop the material separately for soup. The cycle time is short and the oxidation and burning loss is small. It is suitable for high-speed continuous production of small parts and the daily output of a single machine is high.
    ✅PLC segmented injection + optional servo, accurate molding, energy saving and material saving
    The computer PLC adjusts the injection speed, pressurization, holding pressure and cooling time in stages, and multiple sets of mold recipes can be called with one click; the servo configuration supplies oil on demand, reducing no-load energy consumption. The surface of the casting is smooth, with few pores and flash, and the molding consistency is good.
    ✅The clamping rigidity is sufficient to protect the mold and reduce flash
    The fuselage is made of carbon steel welded, and key parts are heat treated to strengthen it. The inner distance of the coring pillar and the mold opening stroke are matched according to the tonnage. The mold clamping is stable and the impact is small. Complex parts and deep cavity parts are not easy to run out of materials and flash, and the mold life is guaranteed.
    ✅Strong automation expansion capability, can form a fully automatic die-casting island
    Interfaces for spraying, picking up, and conveyor belts are reserved, and can be used with Longhua servo sprayers, picking manipulators, industrial robots, and conveyor belts for online production; the original complete machine + peripheral equipment + consumables are included, and debugging and after-sales are completed in one stop.
    ✅Common accessories and perfect after-sales system
    The material pot, gooseneck, nozzle, injection head, injection rod, nozzle, heating sheath and other consumable parts are supplied from the original factory; we provide pre-production samples, final factory inspection, video troubleshooting, on-site guidance from engineers and a priority policy for upgrading old customers.
    Working Cycle Of Hot Chamber Die Casting Machine
    • Mold clamping: The movable platen moves forward, the mold is closed and locked, and the nozzle tip presses against the mold gate.
    • Feeding (plunger upward): The plunger in the injection cylinder moves upward, opening the feed port, and the molten metal flows into the injection cylinder by gravity.
    • Injection (plunger downward): The plunger moves downward to seal the feed inlet, hydraulically pump the metal into the gooseneck, and inject it into the closed cavity through the nozzle at high speed.
    • Pressurization and pressure-maintaining: After the cavity is filled, it is pressurized and compacted, and the metal solidifies and shrinks under pressure.
    • Cooling and solidification: maintain pressure until the casting solidifies, and the nozzle tip maintains temperature to prevent metal from solidifying in the flow channel.
    • Mold opening and ejection: After the mold is opened and the casting is ejected, the plunger returns to the upper position and enters the next cycle.

    Product Parameters

    Item
    Unit LH-HC-50T
    Die-locking Force
    kN 500
    Die-stroke
    mm
    210 
    Clearance Between Tie Bars
    mm
    290*290
    Die Thickness(Min/Max)
    mm
    120/320
    Ejection Force
    kN
    50
    Ejection Stroke
    mm
    50
    Injection Force
    kN
    50
    Plunger Stroke
    mm
    110
    Shot Position
    mm
    0,-40
    Plunger-tip Diameter
    mm
    45,50
    Shot Weight(Zn)
    kg
    1.1
    Working pressure
    MPa
    10.5
    Motor Rating
    kW
    9.5
    Melting Pot Capacity
    kg
    160 
    Oil Consumption Of Burner
    kg/h
    1.5~6.0
    Oil Tank Capacity
    L
    320 
    Weight Of Machine
    kg
    3500 
    Size(L/W/H)
    mm
    3500x1450x2100

    (Note: We reserve the right to make any technical improvements without prior notice)

    Company Introduction

    Bengbu Longhua Die casting Machine Co., Ltd. is headquartered in Bengbu, Anhui — a time-honored industrial base and a national comprehensive transportation hub. We are a high-tech enterprise specializing in the design, R&D, manufacturing, sales, and global after-sales service of die-casting machines and supporting equipment.

    Our history dates back to 1950, and Longhua officially began R&D and production of die-casting machines in 1982. As a pioneer in China's die-casting machinery sector, we have accumulated decades of industry expertise, driving continuous technical innovation and product upgrades.

    Our full-range portfolio covers cold chamber and hot chamber die-casting machines, along with die-casting manipulators, industrial robots, and other auxiliary equipment. We deliver integrated die-casting production solutions for a diverse range of industries.

    We maintain strong innovation capabilities, holding over 14 invention patents and 21 software copyrights. We also lead the development of the group standard for the Artificial Intelligence Cold Chamber Die Casting Machine. Our products are backed by CNAS test reports and CE certificates, ensuring reliable quality compliance.

    FAQ

    Q1: What alloys are suitable for hot chamber die casting machines?

    Zinc alloy is the primary material, along with tin and lead. Aluminum cannot be used—its high melting point and corrosivity attack the immersed gooseneck and plunger. Use a cold chamber machine for aluminum.               

Q2: What is the main difference between hot chamber and cold chamber machines?

On a hot chamber machine, the injection mechanism is immersed in the molten metal furnace, eliminating the ladling step for faster cycles. Cold chamber machines use a separate furnace and are required for high-melting-point alloys like aluminum and copper.

Q3: How can flash / metal blow-out be prevented?

Ensure the nozzle is aligned with the die sprue, clamping force is sufficient, the gooseneck taper bore is heated to ≥300°C, and the nozzle-off delay is set properly. Check the clamping limit switch regularly.

Q4: What are the key daily maintenance points?

Check plunger-to-shot-sleeve clearance, gooseneck condition, and nozzle heating every shift. Monitor hydraulic oil temperature/pressure and accumulator nitrogen pressure (above 4–5 MPa). Keep spare wear parts in stock.

Q5: Can the machine run fully automatically?

Yes. With a take-out robot, sprayer, and conveyor, it can form an automated cell. Confirm all interlocks before auto operation: safety door closed, ejector returned, robot home, clamping stroke complete. Servo or proportional hydraulic systems are recommended for higher repeatability.

Send a Message
if you have any problem when using the website or our products, please write down your comments or suggestions, we will answer your questions as soon as possible!Thank you for your attention!
leave a message leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

News

Contact